In the This connection uses the following items box, click Internet Protocol (TCP/IP), and then click Properties. Right-click the local area connection that you want to modify and then click Properties. Click Start, point to Control Panel, and click Network Connections. Log on to the computer by using the Administrator account. How to change the IP address assigned to a Network Adapter An IP address may be assigned automatically if your network has a Dynamic Host Configuration Protocol (DHCP) server, or you can specify an IP address.

:dns.microsoft.comIP Address. In the Local Area Connection Properties dialog box, click Close.In the Local Area Connection Status dialog box, click Close.In the Open box, type cmd, and then click OK.At the command prompt, type ipconfig /release, and then press ENTER.Type ipconfig /renew, and then press ENTER.The network adapter is assigned an IP address by the DHCP server, and a message similar to the following appears: Windows Server IP ConfigurationConnection-specific DNS Suffix. You must have a DHCP server.Click Obtain an IP address automatically.Click Obtain DNS server address automatically if you do not want to specify the IP address of the Domain Name System (DNS) server.Click OK. Continue with the steps in one of the following two sections, depending on your circumstances.How to automatically obtain an IP AddressFollow these steps to configure the computer to obtain an IP address from a DHCP server.

This IP address must be a unique address in the range of addresses that are available for your network. In the IP address box, type the IP address that you want to assign to this network adapter. Click Use the following IP address if you want to specify the IP address for the network adapter. :192.168.0.1Type exit, and then press ENTER to quit the command prompt.To assign an IP address to the network adapter, follow these steps: :255.255.255.0Default Gateway.

In the Local Area Connection Status dialog box, click Close.There is an IP address conflict: If you try to assign an IP address that is already in use, you receive the following error message:The static IP address that was just configured is already in use on the network. In the Local Area Connection Properties dialog box, click Close. In the Alternate DNS server box, type the IP address of the DNS computer that you want to use if the preferred DNS server becomes unavailable. In the Preferred DNS server box, type the IP address of the computer that resolves host names to IP addresses. In the Default gateway box, type the IP address of the computer or device on your network that connects your network to another network or to the Internet. In the Subnet mask box, type the subnet mask for your network.

You can connect to other computers by using their IP addresses.To work around this issue in a local network, add host-name-to-IP-address mappings in a Hosts file. It prevents you from browsing the Internet. You cannot connect to other computers on the network.Your computer cannot connect to other computers by using host names: If you assign an incorrect DNS server IP address, or if you do not use a DNS server, you cannot connect to computers by using their host names.

Cox 255 255 255 40 Default Gateway